Din 8140 A2 A4 Wire Thread Inserts For ISO Metric Screw Threads Self Locking Type B

1/4" 1/2" 3/4" 3/8" 5/8" 5/16" Metal Black Oxide Flat Washers M2 M2.5 M3 M3.5 M4 M5 DIN 9021

Description

M2.5-0.45 threaded inserts are an insert made of coiled wire. The helically formed coils of diamond-shaped stainless steel or phosphor bronze wire screw into a threaded hole to form a mating internal thread for a screw or stud. These inserts provide a convenient means of repairing stripped-out threads and are also used to provide stronger threads in soft materials such as aluminum, zinc dies castings, wood, magnesium, etc. than can be obtained by direct tapping of the base metal involved. Another common generic name is screw thread insert (STI), although many users persist in calling them all by a prominent brand name, the registered trademark Heli-Coil. Applications include engine cylinder head repair after unintentional over-torquing or cross-threading of spark plugs strips the thread of the socket. Kits with matched tap and coil exist for this. The straight radial piece in the photo is the driver tang which is used as a key to grip with pliers for driving the coil into place and is discarded after installation. Ever Hardware provides custom-made fasteners and customizable packaging.

Stainless steel M2.5-0.45 threaded inserts do not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. 304 stainless steel is the most common form of stainless steel used around the world, largely due to its excellent corrosion resistance and value. It contains between 16 and 24 percent chromium and up to 35 percent nickel—as well as small amounts of carbon and manganese.
The most common form of 304 stainless steel is 18-8, or 18/8, stainless steel, which contains 18 percent chromium and 8 percent nickel.
304 can withstand corrosion from most oxidizing acids. That durability makes 304 easy to sanitize, and therefore ideal for kitchen and food applications. It is also common in buildings, décor, and site furnishings.
304 stainless steel does have one weakness—it is susceptible to corrosion from chloride solutions, or from saline environments like the coast. Chloride ions can create localized areas of corrosion, called “pitting,” which can spread beneath protective chromium barriers to compromise internal structures. Solutions with as little as 25 ppm of sodium chloride can begin to have a corrosive effect.

Specification

Product size

din 8140 1
din 8140 2
din 8140 a
din 8140 a b
din 8140 a2
din 8140 a4
din 8140 b
din 8140 eg
din 8140 eg m16
din 8140 eg m4
din 8140 eg m5
din 8140 eg m6
din 8140 eg m8
din 8140 form a
din 8140 form b
din 8140 m3
din 8140 m6
din 8140-1 form a
din 8140-1 form b
din 8140-3
din 8140a
din 8140-a
din 8140-b
din 8140-eg
din 8140-eg m12
din 8140-eg m24
din 8140-eg m3
din 8140-t2
din iso 8140
din8140 a
din8140a